Daniel Quinn

At the firewall level, port forwarding forwards traffic bound for one port to another machine on your network on an arbitrary port, but the UI built on top of it in your router may not include this.

If it’s not an option in your Fritzbox, your options are:

• Make the service running on your internal network listen on one of those high-number ports instead.
• Introduce another machine on the network that also performs NAT between your router and your machine
• Try to access the underlying firewall in your router to tweak the rules manually. Some routers have an admin console accessible via telnet or SSH that may allow this.
• Get a new router.

The first and last options on this list are probably the best.

It would be absolutely bizarre if you couldn’t connect with WireGuard port and Wireguard obfuscation set to Automatic. Things to try first:

1. Connect without your VPN and try to access a single website like the theguardian.com
2. Once that’s working, enable your VPN and that should do it.
3. If you still can’t get connected, try switching out different countries. Each country listed corresponds to an IP to which your machine will try to connect over a benign port like 443 – so blocking that sort of traffic would be mad unless the IP is explicitly blocked. Therefore, driving to different country targets offers a different IP every time. They’d have to know Mulvad’s whole list and block them all.

If the above somehow doesn’t work, Mulvad offers support through which you can get a temporary Server IP override. You can enter that in the bottom portion of your app’s settings.

Actually, I stepped away from the project 'cause I stopped using it altogether. I started the project to satisfy the British government with their ridiculous requirements for proof of my relationship with my wife so I could live here. Once I was settled though and didn’t need to be able to bring up flight itineraries from 5 years ago, it stopped being something I needed.

Well that, and lemme tell you, maintaining a popular Free software project is HARD. Everyone has an idea of where stuff should go, but most of the contributions come in piecemeal, so you’re left mostly acting as the one trying to wrangle different styles and architectures into something cohesive… while you’re also holding down a day job. It was stressful to say the least, and with a kid on the way, something had to give.

But every once in a while I consider installing paperless-ngx just to see how it’s come along, and how much has changed. I’m absolutely delighted that it’s been running and growing in my absence, and from the screenshots alone, I see that a lot of the ideas people had when I was helming made it in in the end.

Ha! I wrote it! Well the original anyway. It’s been forked a few times since I stepped away.

So yeah, I think it’s pretty cool 😆