Goal:

  • 16TB mirrored on 2 drives (raid 1)
  • Hardware raid?
  • Immich, Jellyfin and Nextcloud. (All docker)
  • N100, 8+ GB RAM
  • 500gb boot drive ssd
  • 4 HDD bays, start with using 2

Questions:

  • Which os?
    • My though was to use hardware raid, and just set that up for the 2 hdds, then boot off an ssd with Debian (very familiar, and use it for current server which has 30+ docker containers. Basically I like and am good at docker so would like to stick to Debian+docker. But if hardware raid isn’t the best option for HDDs now a days, I’ll learn the better thing)
  • Which drives? Renewed or refurb are half the cost, so should I buy extra used ones, and just be ready to swap when the fail?
  • Which motherboard?
  • Which case?
  • monkeyman512@lemmy.worldEnglish
    2·
    4 months ago

    You don’t want hardware raid. Some options you can research:

    • Mdadm - Linux software raid
    • ZFS - Combo raid and filesystem
    • Btrfs - A filesystem that can also do raid things

    Some OS options to consider:

    • Debian - good if you want to learn to do everything yourself
    • Truenas Scale - Comercial NAS OS. I bit of work to get started, but very stable once going.
    • Unraid - Enthusiast focused NAS OS. Not as stable as Truenas, but easier to get started and a lot of community support.

    There are probably other software/OS’s to consider, but those are the ones I have any experience with. I personally use ZFS on Truenas with a lot of help from this YouTube channel. https://youtube.com/@lawrencesystems?si=O1Z4BuEjogjdsslF

    • tburkhol@lemmy.worldEnglish
      1·
      4 months ago

      Ditto on hardware raid. Adding a hardware controller just inserts a potentially catastrophic point of failure. With software raid and raid-likes, you can probably recover/rebuild, and it’s not like the overhead is the big burden it was back in the 90s.

      • JustARegularNerd@aussie.zoneEnglish
        1·
        4 months ago

        I got a server from ewaste because the RAID card did fail and having SAS drives they couldn’t even pull data from it with anything else. It was the domain controller and NAS so as you can imagine, very disruptive to the business. As they should they had an offsite backup of the system and so we just restored onto a gaming PC as a temporary solution until we moved them to M365 instead.

        I just use software RAID on it now and so far so good for about 180 days.

    • TheHolm@aussie.zoneEnglish
      0·
      4 months ago

      I would add LVM to the list of software raids, and remove btrfs as poorly engineered.